Quality Coordinator

Описание

Jeyhun Bodurov
Address: Bakikhanov settlement 4094, House 1P, Baku, Azerbaijan
E-mail: jbodurov@rambler.ru
Mob: +7 777 3300491 (Kazakhstan)
+99450 3216559 (Azerbaijan)

WORK EXPERIENCE:
[pic]

Summary: Well experienced in inspection of construction activities such as piping and structural fit-ups, assemblies, spooling, performing construction activities as per drawings, sketches; quality assurance quality control services, in service inspection, project execution, expediting quality daily audit of welding processes, review of NDT & other procedures, WPS, PQR & WPQ, familiar with various national and international codes & specifications and good exposure for the inspection of material and equipment. Hook up experience. Familiar with different kinds of inspection scopes including material inspection, welding, visual, dimension check, NDE, line walk, hydro test, flushing, baroscopic inspection, reinstatement of sub-systems, leak test, architectural and insulation inspection, site erection supervision and expediting, pipeline welding inspection, familiar with various codes and standards such as ASME, ANSI, AWS and API. RT Interpreter.


July 2019 -March 2021
Company: Petrofac
Position: Lead QC Mechanical/Welding/Coating Inspector
Project: Karachaganak Petroleum Operating, KGDBN project
Location: Kazakhstan, Aksay

• Perform monitoring, informal and formal surveillance of contractor site welding activities for green, brown field and pipeline construction.
• Witnessing of HSS insulation installation on pipeline field joints
• Welding procedure qualification witnessing
• Welders qualification witnessing
• Witnessing of tie-in gold welds
• Review RT films
• Mechanical competition of sub-systems
• Conduct weekly surveillance activities
• Perform site checks on status of consumable welding materials and confirm satisfactory storage, issue site conditions are adequate.
• Ensure contractors fully implement project requirements as defined in approved specifications and procedures
• QC weekly meeting attendance



August 2018 – July 2019
Company: Tecnicas Reunidas EPCM
Position: Senior Welding/Painting Inspector Supervisor
Project: HAOR modernization and reconstruction project
Location: Baku, Azerbaijan
Main Duties:

• Welding procedure qualification witnessing
• Welders qualification witnessing
• Control subcontractor QC team performs/issue the quality requirement for specific activities
• Monitoring prefabrication of tie-in and pipe spools
• Coordinate of Inspection of location new tie-in by TWI
• Witnessing of tie-in gold welds
• Review RT films
• Witnessing surface preparation and painting activities
• Witnessing subcontractor apply painting system in accordance with approved procedure
• Witnessing of DFT measurement, adhesion test and salt test
• Present at the inspection and tests performed according to the ITP
• Maintain up to date status on test and inspections performed
• Provide site assistance to construction team on interpretation of quality requirements
• Preparation of inspection reports.
• Conduct weekly surveillance activities.
• QC weekly meeting attendance




July 2017-July 2018

Company: BP/Swift
Position: Offshore QC Inspector
Project: Hook Up SDB platforms Shah Deniz 2
Location: Baku, Azerbaijan
Main Duties:


• Internal examination of root welding of CRA hook up risers by remote camera viewing.
• Inspection and witnessing of all offshore welding activities
• Conduct daily welding audit.
• Monitoring UT and PAUT inspection of welded CRA risers
• Review RT films
• Checking surface preparation of welded and base metal area before paint applied (surface profile and clearness, humidity & dew point)
• Check WFT and DFT measurement
• Preparation of inspection reports.
• Raise STQ and NCR.
• Conduct weekly surveillance activities.





August 2014 – July 2017

Company: BP/Swift
Position: QC Inspector
Project: Shah Deniz 2
Location: Baku, Azerbaijan
Main Duties:

• Perform monitoring, informal and formal surveillance of contractor site welding activities for topsides construction.
• Perform check on contractors welding results and monitor for site welding improvement.
• Review and confirm contractors site welding parameters are according to procedures.
• Provide HSE leadership and report to BP any unsafe acts or conditions, work with BP and contractors to deliver expectations.
• Oversee contractor welding activities, issue reports on acceptance of welding work done by contractor (piping structural) during all phases of welding completion.
• Perform site checks on status of consumable welding materials and confirm satisfactory storage, issue site conditions are adequate.
• Identify and recommends resolutions of non-conformances and corrective actions to contractors site construction welding activities and monitoring satisfactory close-out.
• Review and participate in contractors inspection and Test plans(ITPs) ensure BP monitor, witness and hold points included in ITPs are implemented.
• Review RT films
• Provide detailed daily, weekly, monthly quality reports as required by project and project meetings as required.
• Review and confirm conformance of contractors welding personnel and procedures.
• Perform performance review, recommend areas for improvement.
• Ensure contractors fully implement project requirements as defined in approved specifications and procedures.
• Source required data for monitoring and reporting Key performance Indicators (KPIs)



June 2010 – December 2013

Company: BP/Moody Intertek
Position: QC Inspector
Project: Chiraq Oil Project COP
Location: Azerbaijan
Main duties:

• Work with the Contractor and the AIOC team to deliver fully on BP’s expectations on HSE.
• Monitor Contractors QC programs and personnel for full compliance.
• Monitor Contractors Quality Plans and ensure the requirements of associated Inspection & Test Plans are fully met.
• Conduct patrol surveillance of the Contractors activities, and of the Contractors QC activities.
• Ensure that the Hold and Witness points identified within the Inspection & Test Plans are implemented.
• Review RT films
• When required, participate in quality audits and assessments on the main contractor or their subcontractors.
• Attend site QC meetings ensuring AIOC quality requirements are fully discussed.
• Source the relevant data for the key quality indicators.
• Make recommendations for quality improvements.
• Participate in the endorsement of Contractors QC personnel required for site.
• Participate in the decision process relating to the disposition of deviations and concessions to specification and codes requested by contractor.
• Aid construction discipline engineers on quality related issues.
• Monitor the performance of special process control activities, to ensure that the activities are conducted by appropriately qualified operators and that the process is conducted in accordance with the approved Procedure.
• Review the performance of Contractors personnel undergoing trade training, and ensure that the competency assessment process is rigorously implemented.



February 2006 – May 2010

Company: Metal-Qaynag-Sinag
Position: QA/QC supervisor
Client: British Petroleum
Project: BTC & WREP pipeline maintenance, BTC Pump Station Expansion Project
Location: Georgia
Main duties:

• Pipeline welding inspection as per API 1104 & ASME B 31.4/31.8 API 5L X52/60/65/70
• Welding inspection of replacement of BTC and Baku-Supsa pipeline section in Turkey and Georgia
• Fabrication and installation of pipe sleeves, split tee on area of pipeline to be repaired
• Fabrication of pipe spools inspection (CS, SS, Duplex SS, LTCS)
• Blasting & Painting Inspection of fabricated spools which includes surface cleanliness check, blasting profile check, DFT and WFT measurement.
• Painting/Coating inspection of underground pipework along with client Paint Inspector
• Pre & post hydro test line walking
• Witnessing pressure tests (hydro, pneumatic, hot oil, flushing, leak testing)
• Reinstatement clearances of sys-systems for handover to client
• Preparation of welding reports and certification dossiers
• Attending daily & weekly meetings


June 2002 - February 2006

Company: McDermott Caspian Contractors Inc
Position: QC Piping/Welding Inspector
Client: Azerbaijan International Operating Company
Project: ACG FULL FIELD DEVELOPMENT PHASE1, 2 & 3 (Central, West, East Azeri, DUQ)
Location: Azerbaijan
Main duties:

• Conducts final system audit / line walk and punch listing of completed assembly or sub-assembly prior to flushing and testing.
• Witness piping hydrostatic/pneumatic test, retro jetting, and bores coping prior to final system reinstatement and handover to the client for BP-AIOC Central Azeri, West Azeri, East Azeri & DUQ - KBR designed Offshore Production Platform (Topsides Module).
• Check all types of insulations of pipe systems.
• Checking that all welding and associated are carried out in accordance with the requirement of the agreed welding specification, procedures relevant to work carried out.
• Verification of parent metal pipe, plate and welding consumables for sizes, condition, specification and storage.
• To verify the correct ness of welding consumable.
• Verifying that dimensions fit up and weld preparations is in accordance with the specified procedures.
• Post welds visual Inspection and dimensional check of completed weld metal against specification requirement and drawing.
• Surveillance during welding process to verify compliance with specified procedure include any preheat, inter pass temperature control and post heat requirements.

• Verification that post weld heat treatment has been conducted in accordance with specification requirements.
• To verify that adequate and valid welder approvals are available and that only approved welders as required are used in production.
• Establishing that a procedure is available, has been approved as required by the appropriate authority and is being employed in production.
• Preparation of inspection report and submit it QA/QC certification department.


COURSES, TRAINING AND CERTIFICATION:
[pic]
Certificates:

CSWIP Senior Welding Inspector 3.2.2
With RT Interpretation (ABCD materials type)
BOSIET certificate
Ameron GRE Inspector certificate body
BGAS Grade 2 Painting Inspector


EDUCATION:
[pic]
Master Degree in Mechanical Engineering
Specialization – Motor-car construction
Azerbaijan Technical University (1990 - 1995)



OTHERS:
[pic]
Languages: Azeri - Native, English - Fluent, Russian - Fluent, Turkish – Fluent
Computer Skills: Windows 2007, MS Office 2013
Driving License: Category B, C